Mercury's Thin CA is great base coat for your wood pens. The water thin CA will provide protection and leave it with a more natural feel than using medium. Thin CA is also great for penetrating the surface of the blank, either during or after turning to help stabilize and harden the wood.
Mercury Adhesives manufactures their CA here in the USA, in Atlanta, GA. It is a medical grade CA that is highly concentrated and 99.9% pure. For finishing pens, just a drop or two is all that is needed for each coat.
There are different formulations for pen makers. Thin, Medium, Low Odor/Fume, & a unique High Performance that is great for oily wood. Plus, it's has reduced fumes for finishing.
Another unique feature isn't with the CA, but with the bottle. Except for the jumbo 8oz refill, all Mercury CA is packaged in clog free bottles. There are three sealing points within the cap, including a steel pin to help keep the tip clear & open. If CA does build up on the tip or cap, just soak it in acetone for little while. These bottles can be refilled and reused many times.
For thin and medium, there is a jumbo 8oz refill available to refill the 2oz bottles. You can also buy cheap squeeze bottles at a hobby/craft shop to use.
Mercury's High Performance CA is engineered for enhanced adhesion on difficult to glue material, such as oily wood (Cocobolo, Olive, Teak, etc.). It's still recommended to wipe the surface with...
Mercury's CA Accelerator is a mild accelerator engineered to quickly set the CA, but to help reduce the blooming that is common with very aggressive accelerators. MH16 is made with...
Mercury's Epoxy gives you plenty of time to get the brass tubes inserted and positioned in your pen blanks. If CA sets up too quickly or you don't like it's...